LAMMPS WWW Site - LAMMPS Documentation - LAMMPS Mailing List Archives
Re: [lammps-users] KIM API Package setup
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [lammps-users] KIM API Package setup


From: Axel Kohlmeyer <akohlmey@...24...>
Date: Wed, 22 Nov 2017 07:21:12 -0500



On Wed, Nov 22, 2017 at 5:46 AM, Vijayan, Prabhu <prabhu.vijayan@...4839...> wrote:
Hi LAMMPS users

When I try to use the command 'make serial' or 'make mpi' in the src folder of LAMMPS, I get the error the following error:

make[1]: Entering directory `/calculate/lammps/src/Obj_serial'
Makefile.package.settings:5: ../../lib/reax/Makefile.lammps: No such file or directory
Makefile.package.settings:7: ../../lib/poems/Makefile.lammps: No such file or directory
Makefile.package.settings:8: ../../lib/mscg/Makefile.lammps: No such file or directory
Makefile.package.settings:9: ../../lib/meam/Makefile.lammps: No such file or directory
../../lib/kim/Makefile.lammps:19: ../../lib/kim/Makefile.KIM_DIR: No such file or directory
../../lib/kim/Makefile.lammps:27: *** kim-api-build-config utility is not available.  Something is wrong with your KIM API package setup.  Stop.
make[1]: Leaving directory `/calculate/lammps/src/Obj_serial'
make[1]: Entering directory `/calculate/lammps/src/Obj_serial'
Makefile.package.settings:5: ../../lib/reax/Makefile.lammps: No such file or directory
Makefile.package.settings:7: ../../lib/poems/Makefile.lammps: No such file or directory
Makefile.package.settings:8: ../../lib/mscg/Makefile.lammps: No such file or directory
Makefile.package.settings:9: ../../lib/meam/Makefile.lammps: No such file or directory
../../lib/kim/Makefile.lammps:19: ../../lib/kim/Makefile.KIM_DIR: No such file or directory
../../lib/kim/Makefile.lammps:27: *** kim-api-build-config utility is not available.  Something is wrong with your KIM API package setup.  Stop.
make[1]: Leaving directory `/calculate/lammps/src/Obj_serial'
make: *** [serial] Error 2


and when I try the same in src/MAKE folder, I get the following:

make: *** No rule to make target `serial'.  Stop.

I am following the steps as per the LAMMPS Documentation.  Could someone kindly help me in this.?

​no, you did​ not. you installed a whole lot of packages which depend on compiling/configuring auxiliary code in the lib folders, and the error messages clear indicates, that you didn't do that.
please re-read the compilation instructions in the LAMMPS documentation, but more thoroughly and with more care.

axel.

 


--
Mit freundlichen Grüßen
Thanks & Regards
Prabhu Vijayan
Student - Computational Engineering,
FAU - Erlangen-Nürnberg,
Germany.

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
lammps-users mailing list
lammps-users@...655....net
https://lists.sourceforge.net/lists/listinfo/lammps-users



--
Dr. Axel Kohlmeyer  akohlmey@...92......  http://goo.gl/1wk0
College of Science & Technology, Temple University, Philadelphia PA, USA
International Centre for Theoretical Physics, Trieste. Italy.