LAMMPS WWW Site - LAMMPS Documentation - LAMMPS Mailing List Archives
Re: [lammps-users] How to save center coordinates of 3d bins in lammps
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [lammps-users] How to save center coordinates of 3d bins in lammps


From: ‪Ali Khodadadi‬ ‪ <alikhodadadi90@...16...>
Date: Wed, 8 Nov 2017 16:44:34 +0000 (UTC)

Thanks for your advice.
I solved this with ave/chunk. This fix gives the center coordinates of the bins.  


From: Julien Guénolé <julien.guenole@...4839...>
To: lammps-users@...459...ourceforge.net
Sent: Wednesday, 8 November 2017, 19:54:00
Subject: Re: [lammps-users] How to save center coordinates of 3d bins in lammps

On 08/11/17 16:54, ‪Ali Khodadadi‬ ‪ via lammps-users wrote:
Hello
Is there any method for saving center coordinates of 3d bins that computed with chunk/atom?

Maybe with the help of the following commands:
compute reduce min
compute reduce max
compute reduce ave

applied on the coordinates of the atoms that compose the group that was used to define the chunk?

Julien.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
lammps-users mailing list
lammps-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/lammps-users