LAMMPS WWW Site - LAMMPS Documentation - LAMMPS Mailing List Archives
Re: [lammps-users] Output lag between output window and log.lammps file
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [lammps-users] Output lag between output window and log.lammps file


From: Andrew Jewett <jewett@...1937...>
Date: Sun, 22 Oct 2017 21:58:29 -0700

Hi Rajesh

Try using:

thermo_modify flush yes

http://lammps.sandia.gov/doc/thermo_modify.html

Cheers
Andrew

On Tue, Oct 17, 2017 at 9:30 PM, Rajesh <creativeidleminds@...24...> wrote:
> Dear lammps users
> How can I get exact output in the lammps log file as in the output window?
> For example, if output windows has the output till say 10000 steps, logfile
> will have upto 4000-5000 steps.
>
> Is there any way so that when I stop the simulation in between, same output
> is also printed in log.lammps file?
>
> Thanks
> Rajesh
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> lammps-users mailing list
> lammps-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/lammps-users
>