LAMMPS WWW Site - LAMMPS Documentation - LAMMPS Mailing List Archives
Re: [lammps-users] Run command
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [lammps-users] Run command


From: Axel Kohlmeyer <akohlmey@...24...>
Date: Thu, 12 Oct 2017 02:02:24 -0400

You can do your loading any which way you want. The important step is to break down the total process into parts and do a run for each part, then change the settings and do the run for the next part. 

Axel 



--
Dr. Axel Kohlmeyer  akohlmey@...24...  http://goo.gl/1wk0
College of Science & Technology, Temple University, Philadelphia PA, USA
International Centre for Theoretical Physics, Trieste. Italy.

On Oct 12, 2017 01:34, "Asadollahzadeh" <niliasadollahzadeh@...24...> wrote:
Does this mean simultaneous loading? I don't want to load first one direction and after that another one. I want to start simultaneously.....

Thanks;
Nili

On Thu, Oct 12, 2017 at 8:52 AM, Axel Kohlmeyer <akohlmey@...24...> wrote:


On Wed, Oct 11, 2017 at 11:11 PM, Asadollahzadeh <niliasadollahzadeh@...24...> wrote:
Hi!
I have bi_axial loading with same rate (0.01); 3% in y direction & 17% in x direction. my time step is 0.001, so I need to do run command 3000 time steps for y & 17000 time steps. How can I apply run command that is started loading in 2 direction simultaneously, after 3000 time steps loading on y is stopped and loading on x is continued the remaining 14000 time steps?

obviously you can use two run commands and change your loading in between.​

axel.

 

So thanks;
Nili

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
lammps-users mailing list
lammps-users@...655....net
https://lists.sourceforge.net/lists/listinfo/lammps-users




--
Dr. Axel Kohlmeyer  akohlmey@...24...  http://goo.gl/1wk0
College of Science & Technology, Temple University, Philadelphia PA, USA
International Centre for Theoretical Physics, Trieste. Italy.


------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
lammps-users mailing list
lammps-users@...6297....sourceforge.net
https://lists.sourceforge.net/lists/listinfo/lammps-users